Lighting the Way to Family Harmony

Johnny-Light^™ Installation Instructions

Johnny-Light™ fits most standard residential toilet seats. It shines into the bowl when the seat is raised, and goes "off" when the seat is down. Your light is protected from splashing and contamination when the seat is down. If necessary to clean your Johnny-Light™, use a mild detergent and a damp cloth. Rinse and dry.

Installation Instructions

1. Pull out the tabbed end cap and install the batteries according to the (+) and (-) signs on the end cap and bracket. With the closed end against a table top, push the batteries down to make contact at the inner end and reinsert the end cap, taking care that the spring contacts are not flattened.
2. For seats with separate hinge assemblies, insert extended ends of the Johnny-Light™ bracket between the hinges and the back edge of the seat. (see Fig. 1)
3. For plastic seats with a molded in hinge, discard the mounting bracket. Thoroughly clean and dry the area and apply the included VELCRO tape. Then firmly attach the Johnny-Light™ to the VELCRO. (see Fig. 2)

Caution: If it falls in, it's gone!

WARNING!: A curious child may be attracted to the light reflection in the water and fall in. Please supervise small children around the toilet.

Home | About Us | Testimonials | In the News | Installation Instructions
Contact Us | Distributors | Order Online

Order your today!

1-888-566-LITE (5483)
E-mail: info@johnny-light.com

Website designed and maintained by Bogart Designs